Skip to main content

IS5203 Week 5 Quizezz

1. Question
Actioned
Item completed: 02/10/2022 04:36 AM
Value: 1
Answer: A VLAN mismatch
PASS
2. Question
Actioned
Item completed: 02/10/2022 04:37 AM
Value: 1
Answer: VLAN mismatch
PASS
3. Question
Actioned
Item completed: 02/10/2022 04:37 AM
Value: 1
Answer: An IEEE 802.1q trunk
PASS
What is the formula for determining the number of possible hosts on a network?
CORRECT
While designing your network's VLAN topology, your team has decided to use a centrally managed DHCP server rather than creating a separate DHCP server for each VLAN. What software will you need to make the central DHCP server accessible across VLANs?
CORRECT
Which hexadecimal block in an IPv6 address is used for the Subnet ID?
CORRECT
Which formulas can be used to calculate the magic number? Choose two.
CORRECT
How many bits of a Class A IP address are used for host information?
CORRECT
What is the least number of bits you would need to borrow from the network portion of a Class B subnet mask to get at least 130 hosts per subnet?
CORRECT
Which of the following is not a good reason to segment a network?
CORRECT
What do well-chosen subnets accomplish?
CORRECT
Which port mode on a switch enables that port to manage traffic for multiple VLANs?
CORRECT
Which IEEE standard determines how VLANs work on a network?
CORRECT





























































































 

Comments

Post a Comment

Popular posts from this blog

IS5203 Type 2 Post Assessment and Final Quiz

  Carlos has just created a new subnet for the finance department. He needs to be able to allow the employees in finance to retrieve files from the sales server, which is located in another subnet. Which of the following OSI model layers would it be necessary to categorize the device into? a. Layer 4 b. Layer 6 c. Layer 2 d. Layer 3 All of the cubicles in a company's office have cables that run up to the ceiling and across to an IDF. Inside the IDF, they connect directly to the latest generation switch available from the networking equipment vendor that they have chosen. Which of the following describes the physical topology most likely in use? a. mesh
Post a Comment
Read more

GE5103-2 Project Management [Aug 23 Syllabus]

    Some of the advantages of using time boxes and cycles in project coordination efforts include creating urgency, measuring progress, and allowing for predictable measurements. A)        True 2.    Even though most project managers are not contract specialists, they need to understand the process well enough to coordinate with the team. For the current assignment, you are looking at a short-term and small effort with a contractor of just a few hours without significant clarity. Which of the following would be the most applicable contract to use in this situation? A)        Time and materials 3. The project you are working on has had modifications to the plan from the start and even how the project is run. Project governance covers all of the 3 following except: A)        Naming The project manager 4. Of the following, which is most likely a trigger condition defined early in the project? A) Alerting Governance board if 10 percent over schedule 5. Of the following options, which stand
Post a Comment
Read more

GE5163 Week8 ( Final Exam ) Quize's

  A process or product that is insensitive to normal variation is referred to as being Select one: a. in specification b. capable c. robust d. out of control Feedback Your answer is correct. A completed failure mode and effects analysis (FMEA) results in the following assessment rating.      Occurrence = 4      Severity = 8      Detection = 10 What is the risk priority number (RPN) for this FMEA? Select one: a. 42 b. 22 c. 320 d. 120 Feedback Your answer is correct. In a visual inspection situation, one of the best ways to minimize deterioration of the quality level is to: Select one: a. have a program of frequent eye exams. b. retrain the inspector frequently. c. add variety to the task. d. have a standard to compare against as an element of the operation. Feedback Your answer is correct. Which of the following elements is least necessary to a good corrective action feedback report? Select one: a. What caused the failure b. Who caused the failure c. What correction has been made d. Wh
Post a Comment
Read more